Window Tinting Lexington SC

Window Tinting Tips: Everything You Must Know

Window Tinting: A Comprehensive Guide

Window tinting can be a beautiful, practical, and artistic addition to your home. It is also an important detail in terms of security and privacy. But before you pick up the phone to make that appointment with window tinting Lexington SC, there are some things you need to know about residential window tinting.

Window tinting is a service that can be applied to both the inside and outside of your windows. The window film will protect you from UV rays, as well as provide protection for furniture against fading or grime by deflecting dirt particles away. Window films also offer insulation (since they are made of polyester). They are available in an array of colors, so you can get them customized just how you want them with regards to style, design preferences, and functionality.

Window Tinting Lexington SC

After choosing what type of residential window tinting installation process works best for your needs–vinyl vs. reflective films–you’ll need to prepare your windows onsite before installation begins: Remove any curtains or drapes if applicable; Cover up lamps if the window is facing a neighbor’s property, as this may cause glare and light interference during the installation process.

The next step in preparing your windows for tinting will be to use masking tape on any surface that you don’t want covered by film–this includes surfaces such as window sills, moldings, doors (exterior), fireplace mantels or trim work. The installer should arrive with their own supplies of course; However if they forget something specific like gloves or squeegee after telling them what materials are needed ahead of time then it would also be worth supplying those items before installation begins. Once everything has been properly prepared and all parties have arrived at the location where residential window tinting needs to be installed, most companies recommend an application of soapy water to the surface, which will help the film adhere. This can be done with a solution of dish soap and water beforehand or on-site by applying it directly to an absorbent cloth and wiping over window surfaces for about one minute each–this is most important near edges where frames meet; Be sure not to allow any excess liquid (soap) go down outside windowsills onto carpets or flooring as this may cause damage later on.

After allowing around 20 minutes for drying time, installation begins: The installer should start at the top left side of your first window, then work their way across row by row all the way from top to bottom until they reach the end.